CGM 300
Dressing and Sharpening Machine CGM 300
- manual dressing and sharpening machine for saw blade diameters of 230 mm to 1.600 mm
- flexible low-maintenance and userfriendly machine
- particularly suitable for small batches and special tools
- long service life of guides and drives due to an optimized sealing system
- for wet and dry operation
Options
- clamping flanges for core Ø 230 – 400 mm and Ø 600 – 1,600 mm
- belt filter
TAM 216
Dressing and Sharpening Machine TAM 216
- automatic dressing and sharpening machine for saw blade diameters from 200 mm to 1,600 mm
- constant peripheral velocity of grinding wheels
- easy programming due to preset operating cycles
- flexible working due to fast set-up times
- particularly suitable for batch production
- long service life of guides and drives due to an optimized sealing system
- for wet and dry operation
Options
- adapter rings for larger holding bolts
- belt filter
- tiltable grinding wheels for relief grinding and cleaning of the brazing zone (angle 3°)
- spindle extension for grinding of cup wheels of Ø 0 – 250 mm
TAM 308
Dressing and Sharpening Machine TAM 308
- fully automatic dressing and sharpening machine for saw blade diameters from 100 mm to 600 mm
- constant peripheral velocity of grinding wheels
- easy programming due to preset operating cycles
- flexible working due to fast set-up times
- particularly suitable for batch production
- long service life of guides and drives due to an optimized sealing system
- position input by teach-in
- constant peripheral velocity of grinding wheels
- for wet and dry operation
Options
- clamping flanges for core Ø 86 -200 and Ø 400 – 800 mm
- adapter rings for larger holding bolts
- larger spindle for diameters from 200 – 820 mm
- magazine TLP 308 for automatic loading and unloading (approx. 1 h unmanned
- belt filter
WGM 60
Dressing and Sharpening Machine for Diamond Wires WGM 60
- dressing and sharpening machine for diamond wires between 14 and 60 m length
- immediate cutting performance by exposing the diamond
- even sharpening of the beads by automatic rotation of the wire
- adjustable wire and grinding wheel speed
- constant peripheral velocity of grinding wheels due to automatic rotation speed regulation, in comparison with the previous model SAM 205/210 not operator dependent
Dressing and Sharpening
The dressing and sharpening machine is a specialised device for exposing diamonds and sharpening cutting discs up to Ø 1,600 mm and ropes up to 60 m in length.
The purpose of dressing and sharpening is to expose the diamonds to ensure optimum cutting performance, to sharpen cut-off wheels for precise and efficient cutting and to enable the care and maintenance of diamond tools for a longer service life.
Features of the dressing and sharpening machine include customisable settings for different tool types and sizes, precise control over the dressing and sharpening process and automation for efficient and repeatable results.
In terms of precision and control, the machine enables the monitoring of dressing and sharpening parameters to ensure tool quality, with the ability to fine tune according to end product requirements.
Increased efficiency is achieved by integrating automated dressing and sharpening processes for higher production speeds and improving cut quality through precise sharpening.